Mutiny has launched the Mutiny 12G Isolator to guard video tools with 12G SDI ports from failure. Cameras, recorders, and displays with 12G SDI inputs and outputs are notoriously prone to wreck attributable to electrostatic discharge and energy surges. To assist stop this injury, Mutiny has partnered with Freak Present to create a light-weight insulator with two phases of safety. Don’t let your costly tools get fried! Let’s see what this new insulator from Munity is all about.

The difficulty with 12G SDI port failures is mentioned quite a bit on digicam boards throughout the web. This failure can happen when SDI cables are hooked up whereas powering tools on/off, utilizing cables that lack correct shielding or cables which can be longer than 30 ft.

RED SDI security protocol video, supply: RED

Following the discharge of the Komodo, RED posted an SDI port security protocol video to handle greatest practices to guard your tools. Nonetheless, the injury to 12G SDI ports isn’t unique to RED – this phenomenon can happen with any video tools with a 12G SDI port.

Greatest apply recommends retaining all SDI cables disconnected from the digicam and equipment till they’re absolutely powered on. Moreover, it’s suggested to detach the SDI cables earlier than powering down the tools.

Len 12G Galvanic Isolator | FreakshowHD Reclocking DA | Picture credit score: Mutiny

A number of merchandise already in the marketplace try to resolve this difficulty: SDI isolators and SDI Reclocking distribution amplifiers.

SDI isolators provide some safety from electrostatic discharge and energy surges. SDI Reclocking DAs, just like the Freakshow HD MSX2-O 1×2, be sure that if an ESD or surge does any injury, it is going to be to the DA and never your costly digicam.

Mutiny 12G SDI Isolator

Mutiny 12G SDI Isolator entrance & again | Picture credit score: Mutiny

The Mutiny 12G isolator was co-developed with FreakshowHD to assist defend the 12G port in your digicam, monitor, or different 12G SDI system. It’s a light-weight, powered 12G isolator system with a cut-off change.

Slightly than eradicating the 12G SDI cable from the digicam when powering up/down, you turn from the sign (SIG) to isolation (ISO) mode. As soon as switched to ISO, the pink LED turns off, and your sign feed to your monitor/wi-fi TX is lower whereas sustaining floor always.

Mutiny 12G SDI Isolator | Picture credit score: Mutiny

Switching the Mutiny 12G isolator from ISO to SIG is your final step when powering the digicam and equipment again on once more.

In line with Mutiny, the 12G isolator options two ranges of safety. The primary stage of safety is an AC-coupled ESD good circuit that stops any DC on the sign. The second stage of safety is an digital change that, when engaged, cuts the sign path to the digicam and the monitor / wi-fi transmitter, retaining floor current always.

This energy cut-off stops any energy spikes from returning to the digicam’s delicate 12G SDI port. They nonetheless suggest detaching SDI cables earlier than powering on/off all 12G tools.

Mutiny 12G SDI Isolator on RED Komodo | Picture credit score: Mutiny

Mutiny lists the next cameras that may profit from this 12G isolator. This checklist will not be full, as any digicam with a 12G port suffers from this difficulty.

• RED KOMODO (KOMODO-X)
• RED V-RAPTOR S35/VV/XL)
• Sony (Venice / Venice 2 / FX6 / FX9 / FR7)
• ARRI (Alexa 35)
• Canon (C300 MKIII/C500 MKII)

Mutiny 12G Isolator specs

Mutiny 12G SDI Isolator | Picture credit score: Mutiny

Mutiny’s 12G isolator is extremely easy and light-weight. It options an IN and OUT 12G SDI port, a 2pin 0B energy enter and output with passthrough, and an on/off change.

• IN (ISO): Connects to digicam 12G SDI output
• OUT (SIG): Connects to a monitor or wi-fi transmitter (TX)
• Weight: 1.8oz
• Top: 2″
• Width (together with BNC ports): 2.7″
• Depth: 0.9″
• Voltage vary: 5-36 volts
• Max Present: 4A MAX to stop DC loop
• SDI sign: +/- 400mV @ 12G/6G/3G SDI

Value and availability

Mutiny 12G SDI Isolator entrance & again | Picture credit score: Mutiny

The Mutiny 12G Isolator is presently obtainable to pre-order for a particular introductory worth of $310. Items are anticipated to start delivery on the finish of July.

Following the pre-order, the value will enhance to $330.

Why wasn’t an isolator with a cut-off change constructed into the digicam or accent within the first place? As somebody who by chance burned out a 12G SDI port on a Komodo, I’d prefer to know, too. Nonetheless, $330 to guard your tools is best than the restore and downtime value whereas within the store.

Go to Munity’s site for extra details about the Mutiny 12G Isolator.

How do you are feeling in regards to the points with 12G SDI ports? Is a product just like the Mutiny isolator the best way to go, or is it higher to solely comply with SDI protocol? Tell us your ideas within the feedback under.